E-Skate modulable with battery selector

Hi again¡

Today I’m bringing my best project by the moment, my modulable electric skateboard.

Nowadays there a tons and tons of electric longboard , and tons and tons of  DIY projects of electric skateboard, so why this one should be interesting? because as all my projects, something original that you haven’t seen before and new are in there,… mmm and what is this? let me explain it:

1- It is modulable¡ what it means? It mean that there are two specific and important parts that you can move and use in other electric skate. In my skate only the gears and the motor are always joined to the skate. By one side, we have the part of the ESC, voltimeters, selector, switches, etc and in the other side, two batteries.  you can remove this parts easily and use it in other skate with an electrical motor mounted.

2- Battery selector. Single or serial.  The electrical parts have 2 selectors with two positions. Deppending that how it is switched you can obtain:

Pos1-Pos1: Power OFF             // Pos1-Pos2: Works only the right battery

Ps2-Ps2: Only the left battery // Ps2-Ps1: Serial mode, two batteries working together.

This slideshow requires JavaScript.

Why is this important and interesting?

1-Because the batteries and electronic parts are the most expensive and complicated parts, and in this way you can have to different skates with a motor mounted, for example, one longboard for large journeys and a cruise board for go around the city. And you don’t have to buy batteries and do all the electrical stuff for both, you can swap it easily depending that the use that you need or the kind of journey.

2– The battery selector allows you chose more autonomy or more power, it is super interesting because you can choose in one click more speed or more kilometers.

Let me explain this features better, but before, is important to say that box parts, the connector and the lights holder , all of them are pieces designed for print in a standard 3D printer,


Now, I would like to begin explaining the electrical part, maybe the most important part.

A simple and normal schematic for a electric longboard is the next,

For a single battery:


For two batteries in a serial connection:

esquemaS2 - copia.jpg

But the important feature here is the next:

Two selectors with two position and this allows you use the batteries individually or together, so you can use one each time and have more life battery, so more kilometer to run, o use it together and have all the power possible.

Added to this, there are other features important as well, like the light circuit, and another important thing, is that you can charge the batteries without remove it. All the charging ports have a bridge to charge it in a easy way and without the necessity of remove it each time.

So the schematic is the next one:


Yes, I know, it´s quite complicated, but it´s worth the time to understand, and believeme, it really works.

I attach another drawn with the 4 positions


The other interesting feature, is the versability, the possibility of extract easily the batteries and all the electronic parts in few seconds.

This is possible thanks to the slots in the boxes. The boxes remains together that a elastic rubber that don’t allow separate the two parts, but once you have remove the rubber band you are able to extract these parts and move it tho other skate with a motor mounted in.


That all folks¡ As you know any question will be welcome¡

and some more pictures for you guys¡


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.